DTC Troubleshooting: P0369 (89-6)
|DTC P0369:||Camshaft Position (CMP) Sensor Intermittent Interruption|
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review General Troubleshooting Information.
|1.||Clear the DTC with the HDS.|
|2.||Start the engine, and run it idle for 10 seconds.|
|3.||Check whether the DTC P0369 is indicated in the DTCs/Freeze Data in PGM FI Mode Menu with the HDS.|
Is DTC P0369 indicated in the PGM FI system?
NO - Go to 4.
|4.||Check whether the DTC P0369 is indicated in the DTCs/Freeze Data in A/T Mode Menu with the HDS.|
Is DTC P0369 indicated?
YES - Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If the symptom/indication goes away with a known-good PCM, replace the original PCM.n
NO - Intermittent failure, the system is OK at this time.n