|1.||Wait until the engine is cool, then carefully remove the radiator cap and fill the radiator with engine coolant to the top of the filler neck.|
|2.||Attach the pressure tester (A) (commercially available) to the radiator. Use a small adapter H-901122-09 (B) (commercially available) to attach the pressure tester.|
|3.||Apply a pressure of 93-123 kPa |
(0.95-1.25 kgf/cm2, 14-18 psi).
|4.||Inspect for engine coolant leaks, and a drop in pressure.|
|5.||Remove the tester, and reinstall the radiator cap.|
|6.||Check for engine oil in the coolant and/or coolant in the engine oil.|