Engine Oil Filter Feed Pipe Replacement
|1.||Remove the oil filter.|
|2.||Remove the oil filter holder.|
|3.||Install the two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe. Hold one nut with a wrench, then use a second wrench to tighten the other nut.|
|4.||Tighten the oil filter feed pipe to the block to |
49 N·m (5.0 kgf·m, 36 lbf·ft), then remove the nuts from the oil filter feed pipe.
|5.||Install the oil filter.|