A/T Differential Carrier Bearing Replacement

Special Tools Required
Bearing Separator (  07KAF-PS30200)
 

Attachment, 40 x 50 mm (  07LAD-PW50601)
 


NOTE:

1.Remove the final driven gear from the differential carrier.

2.Install the bearing separator between the bearing inner race and the carrier. Place a collar (A) on the carrier, and install the commercially available bearing puller (B).

 

3.Remove the carrier bearing (C).

4.Install the new carrier bearing (A) with the special tool using the small end and a press until it bottoms. Press the bearing on securely so there is no clearance between the bearing and the differential carrier.

 

5.Install the final driven gear on the carrier.