Fuel Supply System

Fuel Tube/Quick-Connect Fittings Installation


  1. Check the contact area (A) of the pipe (B) for dirt and damage, and clean if necessary.

  1. Insert a new retainer (A) into the connector (B) if the retainer is damaged, or after
  • replacing the fuel rail.
  • replacing the fuel feed pipe.
  • replacing the fuel pump.
  • replacing the fuel filter.
  • replacing the fuel gauge sending unit
  • removing the retainer from the pipe.

  1. Before connecting a new fuel tube/quick-connect fitting assembly (A), remove the old retainer from the mating pipe.