Parking Brake Cable Replacement
- The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure.
- Refer to the Exploded View as needed during this procedure.
|1.||Raise the rear of the vehicle, and make sure it is securely supported.|
|2.||Release the parking brake lever fully. Move the driver's seat (RHD: assistant seat) all the way forward.|
|3.||Pull back the carpet on the floor at the under the seat. Remove the screw and bolt for the parking brake equalizer cover (A).|
|4.||Remove the return spring (A).|
|5.||Back off the adjusting nut (A) in the equalizer, and disconnect the parking brake cable ends (B) from the equalizer.|
|6.||Remove the cable guide base (C).|
|7.||Remove the rear brake shoes, and disconnect the parking brake cable from the shoe.|
|8.||Remove the flange bolts (A) and parking brake cable (B) from the backing plate (C).|
|9.||Reinstall the parking brake cable in revers order of removal, and note these item.|