Front Seat Belt Replacement - Front Center

NOTE: Check the front seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.

Passenger's Front Seat Buckle/Front Center Lap Belt Buckle


1.Remove the rear inner seat track end cover.

 

2.From the rear inner of the passenger's front seat track (A), remove the center anchor bolt (B).

 

3.Pull the passenger's front seat belt buckle (C) and front center lap belt buckle (D) out.

4.Install the buckles in the reverse order of removal, and note these items:

  • Make sure there are no twists or kinks in the seat belt buckles.
  • Assemble the collar and washers on the center anchor bolt as shoun.

Center anchor bolt construction: 

Front Center Lap Belt


1.Slid the driver's front seat forward fully.

2.From the rear inner of the driver's front seat track (A), pull the anchor cover (B), and remove the center anchor bolt (C), then remove the front center lap belt (D).

 

3.Install the seat belt in the reverse order of removal, and note these items:

  • Make sure there are no twists or kinks in the seat belt.
  • Assemble the collar and washers on the center anchor bolt as shown.

Center anchor bolt construction: