Rear Door Outer Handle Replacement
NOTE : Put on gloves to protect your hands.
|3.||Remove the screws, and release the hooks (A), then remove the rod protector (B).|
|4.||Remove the access cap (A), then disconnect the outer handle rod (B).|
|5.||Remove the bolt, then remove the protector (A).|
|6.||Remove the bolt, then remove the spacer (A).|
|7.||While pulling the outer handle (A), remove the handle from the holes in the door panel.|
Take care not to scratch the door.
|8.||Install the handle in the reverse order of removal, and note these items:|
- Make sure the outer handle rod is connected securely.
- Make sure the door locks and opens properly.