Emblem/Sticker Replacement

NOTE: When removing the emblem/sticker, take care not to scratch the body.

1.To remove the front ‘‘H'' emblem, remove the front grille.

2.Clean the body surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.

3.Apply the emblem/sticker, where shown. When installing the REALTIME 4WD sticker on the hatch glass, align the application tape with the alignment marks, then press the sticker into place, and remove the application tape.



4.After installing the front ‘‘H'' emblem, reinstall the front grille to the front bumper, and reinstall the front bumper.