Front Wheel Arch Protector ReplacementNOTE:
- Take care not to scratch the body.
- Put on gloves to protect your hands.
|1.||Remove the screw, then detach the wheel arch portion of the front bumper outward.|
|2.||On the back of the wheel arch, remove the screws (A), then remove the front splash guard (B). With a Torx T30 bit, remove the bolt (C).|
|3.||Remove the front inner fender.|
|4.||Remove the front wheel arch protector (A) while pinching the clips from inside the front fender.|
|5.||Install the protector in the reverse order of removal, and replace any damaged clips.|