Front Wheel Arch Protector Replacement

  • Take care not to scratch the body.
  • Put on gloves to protect your hands.

1.Remove the screw, then detach the wheel arch portion of the front bumper outward.

2.On the back of the wheel arch, remove the screws (A), then remove the front splash guard (B). With a Torx T30 bit, remove the bolt (C).


3.Remove the front inner fender.

4.Remove the front wheel arch protector (A) while pinching the clips from inside the front fender.


5.Install the protector in the reverse order of removal, and replace any damaged clips.