Roof Side Rear Trim Replacement

NOTE: Put on gloves to protect your hands.

1.Using a flat-tip screwdriver wrapped with protective tape, pry up on the front lid (A) of the roof side front trim to detach the hook (B), and remove the screw.

 

2.Using a flat-tip screwdriver wrapped with protective tape, pry up on the middle lid (A) of the roof side front trim (B) to detach the hooks (C), and remove the bolts.

 

3.Using a flat-tip screwdriver wrapped with protective tape, pry up on the rear lid (A) of the roof side front trim (B) to detach the hooks (C), and remove the bolts.

 

4.Release the pin (A) by pulling the front portion of the roof side front trim (B) up, and hold it.

 

5.Release the trim from the clips (C, D, E), and release the hooks (F) by sliding the trim rearward, and remove the trim. Take care not to scratch the other trim and body.

6.Replace any damaged clips (A, B, C).

 

7.Remove the clips (A, B, C) from the body, and install them on the roof side front trim (D).

8.Fit the clips (A, B, C) into the holes in the body, then push on the trim until the clips snap into place.

9.Install the bolts, and install the lids.