Roof Side Front Trim Replacement

NOTE: Put on gloves to protect your hands.

1.Remove the taillight.

2.Remove the bolt (A) and clip (B) from the rear portion of the roof side rear trim (C).

 

3.Using a flat-tip screwdriver wrapped with protective tape, pry up on the rear lid of the roof side front trim to detach the hook, and remove the screw.

4.Remove the roof side rear trim (A) from the clips (B, C) by sliding the trim rear ward, then remove the trim. Take care not to scratch the body.

 

5.Replace any damaged clips (A, B).

 

6.Remove the clips (A, B) from the body, and install them on the roof side rear trim (C).

7.Insert the roof side rear trim in the roof side front trim (D), and fit the clips (A, B) into the holes in the body, then push on the trim until the clips snap into place.

8.Install the bolt clip, and install the lid.

9.Reinstall the taillight.