Tailgate Stop Assembly Replacement - Honda CR-V 2002 2003 2004 2005

Tailgate Stop Assembly Replacement

NOTE:

• Take care not to scratch the tailgate.
  
• Put on gloves to protect your hands.
  

1.	Remove the tailgate lower trim panel

2.	Disconnect the tailgate rod (A) at the lower end from the tailgate latch.

3.	Remove the bolt, then remove the tailgate stopper assembly (A).

4.	If necessary, disconnect the tailgate rod (B) from the tailgate stepper assembly.

5.	Install the stopper assembly in the reverse order of removal, and note these items: Make sure the tailgate rod is connected securely. If you removed the tailgate rod from the tailgate stopper assembly, adjust the rod when reinstalling it. Make sure the tailgate opens properly.