Carpet Replacement

SRS components are located in this area. Review the SRS component locations, and the precautions and procedures, before performing repairs or service.

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to damage, wrinkle or twist the carpet.
  • Be careful not to damage the dashboard or other interior trim pieces.

1.Remove these items:


2.RHD: Detach the clips, then remove the footrest (A).

 

3.Remove the carpet (A).

-1 Remove the clips (B).
-2 Detach the clips (C), then pull back the trunk floor mat (D).
-3 Release the fasteners (E), then pull back the carpet from under the dashboard.
-4 Remove both rear seat belts (F) through the slit in the carpet, and release the fasteners (G) for both rear side trim panels.

 

4.Install the carpet in the reverse order of removal, and note these items:

  • Take care not to damage, wrinkle or twist the carpet.
  • Make sure the seat harnesses are routed correctly.
  • Replace any damaged clips.
  • Slip both rear seat belts through the slit in the carpet properly.