Dashboard Center Panel Removal/InstallationNOTE:
- Take care not to scratch the dashboard and related parts.
- LHD is shown, RHD is symmetrical.
|1.||Remove the screws from the bottom of the dashboard center panel (A).|
|2.||Pull out on the bottom of the dashboard center panel (A) to make creat a gap between the dashboard and panel. Gently pull out along the panel to release the clips, then remove the panel. Disconnect the hazard warning switch connector (B).|
|3.||Install the panel in the reverse order of removal, and make sure the hazard warning switch connector is plugged in properly.|