Dashboard Center Tray Removal/Installation

  • Put on gloves to protect your hands.
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts to prevent damage.
  • Take care not to scratch the dashboard and related parts.
  • LHD is shown, RHD is symmetrical.

1.Remove the dashboard center panel.

2.Using a flat-tip screwdriver, pry out the upper portion of the lid (A) to release the hooks (B), and release the bottom hooks (C), then remove the lid. Remove the screw.


3.Hold the screw mounting portion of the dashboard center tray (A) by hand, and pull out the tray to release the clips (B, C) and hooks (D), then remove it.


4.Install the tray in the reverse order of removal.