Brake Pedal Position Switch Test

1.Remove the driver's dashboard lower cover.

2.Disconnect the 4P connector (A) from the brake pedal position switch (B).

 

3.Check for continuity between the No. 1 and No. 2 terminals.

  • There should be continuity when the brake pedal is pressed.
  • There should be no continuity when the brake pedal is released.

4.Check for continuity between the No. 3 and No. 4 terminals (with cruise control).

  • There should be no continuity when the brake pedal is pressed.
  • There should be continuity when the brake pedal is released.

5.If necessary, adjust or replace the switch, or adjust the pedal height.