Spotlights Test/Replacement - Without Roof Console

Without Roof Console:

1.Turn the light switch OFF.

2.Carefully pry off the lenses (A) with a small screwdriver.

Spotlight: 8 W x 2 


3.Remove the two mounting bolts.

4.Disconnect the 2P connector (B) from the housing (C).

5.Check for continuity between the terminals in each switch position according to the table.


6.If the continuity is not as specified, check the bulb (D). If the bulb is OK, replace the light.

7.When installing the spotlights housing, if the threads in the ET screw are worn out, use an oversized ET screw made specifically for this application.