Sunroof Motor Test
|1.||Remove the headliner.|
|2.||Disconnect the 6P connector (A) from the sunroof motor (B).|
|3.||Check the motor by connecting power and ground according to the table.|
|4.||If the motor does not run or fails to run smoothly, replace it.|
NOTE: See the closing force check for the motor clutch test.
Limit switch test:
|5.||Check for continuity between the terminals in each switch position according to the table.|
NOTE: Turn the motor by hand with the wrench.
|6.||If the continuity is not as specified, adjust the limit switch, and recheck.|
|7.||If the continuity is still not as specified, replace the moonroof motor.|