Sunroof Motor Test

1.Remove the headliner.

2.Disconnect the 6P connector (A) from the sunroof motor (B).


Motor test:

3.Check the motor by connecting power and ground according to the table.


4.If the motor does not run or fails to run smoothly, replace it.

NOTE: See the closing force check for the motor clutch test.

Limit switch test:

5.Check for continuity between the terminals in each switch position according to the table.

NOTE: Turn the motor by hand with the wrench.


6.If the continuity is not as specified, adjust the limit switch, and recheck.

7.If the continuity is still not as specified, replace the moonroof motor.