Sunroof Position Switch Adjustment

1.Remove the headliner.

2.With the sunroof wrench, close the glass (A) fully:


3.With an open-end wrench, loosen the position switch mounting bolts (C).

4.Adjust the position switch (D):

  • Move the switch plate (E) a little at a time, then secure it in the position where you hear a faint click when the switch cam (F) pushes the position switch (open/close).
  • Check that the switch plate contacts the switch bracket (F).

5.Check the operation of the glass (from the tilt-up position to fully closed position, from the fully open position to the fully closed position) by operating the sunroof switch.