Power Mirror Actuator Test

1.Remove the door panel.

2.Disconnect the 6P or 3P connector (A) from the power mirror actuator.

3P connector: without defogger or retract
6P connector: with defogger or retract

 

3.Check actuator operation by connecting battery power and ground according to the table.

 

4.If the mirror fails to work properly, replace the mirror actuator.

Defogger Test:


5.Check for continuity between the No. 1 and No. 2 terminals of the 6P connector. There should be continuity.

6.If the continuity is not as specified, replace the mirror actuator.

Retract Switch:


7.Check actuator operation by connecting battery power and ground according to the table.

 

8.If the retract actuator fails to work properly, replace the mirror.