Front Seat Removal/Installation (KZ/PH/FO/IN/MA)Passenger's Bench Seat Model
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to scratch the body or tear the seat covers.
- Put on gloves to protect your hands.
|1.||Remove the front inner seat track end cover.|
|2.||Remove the rear outer seat track end cover.|
|3.||Passenger's seat:Remove the rear inner seat track end cover.|
|4.||Remove the bolts securing the front seat from the front of both seat tracks.|
|5.||Remove the bolt securing the front seat from the rear outer of the seat track, and remove the center anchor bolt (A) securing the front seat from the rear inner of the seat track, then remove the front center lap belt (B) (driver's seat) or the front seat belt buckle/front center lap belt buckle (C) (passenger's seat).|
|6.||Driver's seat:Lift up the front seat, disconnect the seat belt switch connector (A).|
|7.||Remove the headrest.|
|8.||With the help of an assistant, carefully remove the front seat through the front door opening.|
|9.||Install the seat in the reverse order of removal, and make sure each connector is plugged in properly.|