Third Row Seat Cover Replacement

NOTE:
  • Take care not to tear the seams or damage the seat covers.
  • Put on gloves to protect your hands.

Seat-back Cover


1.Remove the third row seat.

2.Separate the seat-back and seat cushion.

3.Detach the clips, and release the hooks(A), then remove the seat-back board (B) from the back of the seat-back.

 

4.From the back of the seat-back, release the clips(A).

 

5.From the middle portion, pull the edge of the seat-back cover, and remove the strap (A) from the link opener (B).

 

6.Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), then remove the cover with a strap (C).

 

7.Install the cover in the reverse order of removal, and note these items:

  • To prevent wrinkles when installing a seat-back cover, make sure the materrial is stretched evenly over the pad before securing the clips.
  • Replace any clips you removed with new ones , install them with commercially available upholstery ring pliers.
  • Slip the strap (A) between the seat-back frame pipe (B) and rod (C) properly.

 

Seat Cushion Cover


1.Remove the third row seat.

2.Separate the seat-back and seat cushion.

3.Remove the seat strap.

4.Release the hooks (A), and pull back the seat cushion cover (B) to release the fasteners (C).

 


5.Release the clips (A).

 

6.Pull back the edge of the seat cushion cover (A) all the way around, and release the clips (B), then remove the cover.

 

7.Install the cover in the reverse order of removal, and note these items:

  • To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and hooks.
  • Replace any clips you removed with new ones (A). Install them with commercially available upholstery ring pliers (B).