Door Lock Knob Switch Test - Without Super Locking

Driver's Door (Without Supre Locking System):


1.Remove the driver's door panel.

2.Identify the type of door lock actuator.

3.Disconnect the 3P connector (A) from the actuator (B).

 

4.Check for continuity between the terminals in each switch position according to the table.

 

5.If the continuity is not as specified, replace the door lock actuator.

Passenger's Door (Without Supre Locking System):


1.Remove the passenger's door panel.

2.Identify the type of door lock actuator.

3.Disconnect the 3P connector (A) from the actuator.

 

4.Check for continuity between the terminals in each switch position according to the table.

 

5.If the continuity is not as specified, replace the door lock actuator.