Rear Window Wiper Protection Tape Replacement

1.Slowly peel up the old rear window wiper protection tape.

2.Clean the tailgate bonding surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.

3.Peel the adhesive backing from the rear window wiper protection tape.

4.Align the notch (A) of the application tape (B) with the edge of the tailgate (C) and align the top edge of the application tape with the edge of the tailgate, then press the rear window wiper protection tape (D) into place.

 

5.Remove the application tape.