Roof Console Replacement - With Ultrasonic System

With Ultrasonic Sensors


NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  • Take care not to scratch the headliner.

1.Remove the roof console (A).

-1 Remove the lens (B).
-2 Detach the clips (C) and hooks (D), then remove the cover (E).
-3 Disconnect the ultrasonic sensors connector (F).
-4 Remove the screws (G).
-5 Pull out the roof console, and disconnect the front individual map light connector (H).

 

2.Install the roof console in the reverse order of removal, and make sure each connector is plugged in properly.