Rear Differential Oil Seal Replacement

Special Tools Required
Driver (  07749-0010000)
 

Attachment, 78 x 80 mm (  07NAD-PX40100)
 


1.Remove the oil seals (A) from the differential housing.

NOTE: Be careful not to damage the differential carrier while prying out the seals.

 

 

2.Install the oil seals (A) squarely using the special tools. Be careful not to damage the lip of the oil seals.

 

 

3.Remove the oil seal (A) from the torque control differential case (B).

NOTE: Be careful not to damage the shaft or case while prying out the seal.

 

4.Install the oil seal (A) squarely using the special tool. Be careful not to damage the lip of the oil seal.