DTC Troubleshooting: P0341 (57-3)
DTC P0341 (57-3): | VTC Phase Gap |
1. | Reset the ECM/PCM. |
2. | Start the engine. Is DTC P0341 indicated? YES - Go to 3. NO - Intermittent failure, system is OK at this time. Check for poor connections or loose wires at the CMP sensor and at the ECM/PCM.n |
3. | Check the VTC oil control solenoid valve. Is the VTC oil control solenoid valve OK? YES - Go to 4. NO - Clean the VTC oil control solenoid valve, or replace the VTC oil control solenoid valve.n |
4. | Remove the head cover and check the cam chain. Is the cam chain OK? YES - Go to 5. NO - Repair or replace the cam chain.n |
5. | Check the slack in the cam chain. Is the cam chain OK? YES - Go to 6. NO - Repair or replace the cam chain. |
6. | Check the VTC actuator. Is the VTC actuator OK? YES - Substitute a known-good ECM/PCM and recheck. If symptom/indication goes away, replace the original ECM/ PCM.n NO - Replace the VTC actuator.n |