M/T Differential Carrier Bearings Replacement
Special Tool Required
Driver, 40 mm I.D. ( 07746-0030100)
NOTE: 4WD model is shown, 2WD model is similar.
|1.||Check the carrier bearings for wear and rough rotation. If they rotate smoothly and their rollers show no signs of wear, the beaings are OK.|
|2.||Remove the carrier bearing (A) with a commercially-available bearing puller (B).|
|3.||Install the new bearings (A) with the special tool and a press. Press each bearing on until it bottoms. There should be no clearance between the bearings and the carrier.|
NOTE: Turn the seal (B) part of the bearing to the outside of differential, and install it.