Transfer RemovalNOTE: Make sure the lifts, jacks, and safety stands are placed properly.
|1.||Raise the front of the vehicle, and support it with safety stands.|
|2.||Set the parking brake, and block both rear wheels securely.|
|3.||Drain the manual transmission fluid. Reinstall the drain plug with a new sealing washer.|
|4.||Make reference marks (A) across the propeller shaft (B) and the companion flanges (C).|
|5.||Separate the propeller shaft from the transfer assembly.|
|6.|| Remove the transfer (A), dowel pin (B) and O-ring (C).|