Transfer Drive Gear Bearing Replacement

Special Tools Required
Attachment, 37 x 40 mm (  07746-0010200)
 

Attachment, 42 x 47 mm (  07746-0010300)
 
Driver (  07749-0010000)
 


NOTE: Coat all parts with MTF during reassembly.

1.Remove the tapered roller bearing (A) from the transfer drive gear (B) using a commercially available bearing separator (C), the special tools and a press.

 

2.Install the new tapered roller bearing (A) in the transfer drive gear (B) using the special tools and a press.