A/T Clutch Pressure Control Solenoid Valve A Test

1.Remove the air cleaner housing.

2.Disconnect the A/T clutch pressure control solenoid valve A connector.

 

3.Measure A/T clutch pressure control solenoid valve A resistance at the solenoid valve A connector.

STANDARD: About 5 W 

4.If the resistance is out of standard, replace the A/T clutch pressure control solenoid valve A.

5.Connect the battery positive terminal to the No. 1 terminal of the A/T clutch pressure control solenoid valve A connector, and connect the battery negative terminal to the No. 2 terminal. A clicking sound should be heard.

6.If no sound is heard, remove the A/T clutch pressure control solenoid valve A.

7.Check the fluid passage of the A/T clutch pressure control solenoid valve for dust or dirt.

8.Connect the No. 1 terminal of the A/T clutch pressure control solenoid valve A connector to the battery positive terminal, and connect the No. 2 terminal to the battery negative terminal. Make sure the A/T clutch pressure control solenoid valve moves.

 

9.Disconnect one of the battery terminal and check valve movement.

NOTE: You can see valve movement through the fluid passage in the mounting surface of the A/T clutch pressure control solenoid valve A body.

10.If the valve binds or moves sluggishly, or if the solenoid valve does not operate, replace the A/T clutch pressure control solenoid valve A.