A/T Clutch Pressure Control Solenoid Valve A Replacement

1.Remove the air cleaner housing.

2.Disconnect the A/T clutch pressure control solenoid valve A connector.

3.Remove the mounting bolts and the A/T clutch pressure control solenoid valve A.

 

4.Remove the ATF pipe (B), ATF joint pipes (C), O-rings (D), and gasket (E).

5.Clean the mounting surface and fluid passage of the A/T clutch pressure control solenoid valve A and transmission housing.

6.Install the new gasket on the transmission housing, and install the ATF pipe and ATF joint pipes.

7.Install the new O-rings over the ATF joint pipes.

8.Install the new A/T clutch pressure control solenoid valve A.

9.Check the A/T clutch pressure control solenoid valve A connector for rust, dirt, or oil, then connect it securely.

10.Install the air cleaner housing.