A/T Clutch Pressure Control Solenoid Valves B and C Replacement

1.Remove the air cleaner housing.

2.Disconnect the A/T clutch pressure control solenoid valves B and C connectors.

3.Remove the mounting bolts, harness clamp brackets (A), and the A/T clutch pressure control solenoid valves B and C.

 

4.Remove the ATF joint pipes (D), O-rings (E), and gasket (F).

5.Clean the mounting surface and fluid passage of the A/T clutch pressure control solenoid valves B and C and transmission housing.

6.Install the new gasket on the transmission housing, and install the ATF joint pipes.

7.Install the new O-rings over the ATF joint pipes.

8.Install the new A/T clutch pressure control solenoid valves B and C, and harness clamp brackets.

9.Check the A/T clutch pressure control solenoid valves B and C connectors for rust, dirt, or oil, then connect them securely.

10.Install the air cleaner housing.