A/T Selector Hub and 4th Gear Collar Removal

Special Tools Required
Bearing separator (  07KAF-PS30200)

K20A4 and K20A5 Engine Models


1.Remove the reverse selector hub (A) and 4th gear (B) with the special tool, a two-jaw (or three-jaw) puller (C), and a shaft protector (D).


2.Install the special tool with inserting it to the opening between 31 x 50 x 18.5 mm collar (A) and 4th gear collar (B). Set the puller (C) to the special tool, then remove the 4th gear collar.