Transfer Housing Tapered Roller Bearing Outer Race Replacement

Special Tools Required
Handle driver (  07749-0010000)
 

Oil seal driver attachment (  07947-SD90101)
 
Bearing installer attachment (  07KAF-PS30120)
 
Bearing installer attachment (  07LAF-PZ70110)
 
Installer shaft 14 x 165 mm (  07JAF-SJ80110)
 
Installer nuts 14 mm (  07JAF-SJ80120)
 


NOTE: Replace the bearing with a new one whenever the outer race is replaced.

1.Remove the bearing outer races from the transfer housing by heating the housing to about 212°F (100°C) with a heat gun. Do not heat the housing more than 212°F (100°C).

NOTE: Some 57 mm bearing outer races are not press-fitted, and can be removed without heating the housing.

 

Bearing Outer Race Locations 

2.Install the 57 mm bearing outer race (A) in the housing (B) with the special tools.

 

3.Install the 62 mm bearing outer race and 50 mm bearing outer race in the housing with the special tools.