Alternator Replacement

1.Disconnect the battery negative cable, then disconnect the positive cable.

2.Remove the bolt (A) securing the battery clamp, then remove the bulkhead cover (B).


3.Remove the upper bracket and cushion.


4.Remove the drive belt.

5.Remove the auto-tensioner.

6.Remove the gasket (A), then remove the Positive Crankcase Ventilation (PCV) valve holder (B) with a hex wrench.


7.Remove the three bolts securing the alternator.


8.Disconnect the alternator connector (A), BLK wire (B) and harness clamp (C) from the alternator.


9.Remove the alternator.


10.Install the alternator and drive belt in the reverse order of removal.

11.Apply liquid gasket to the PCV valve holder threads, then install the PCV valve holder.

12.Install the upper bracket and cushion. Make sure they are set securely.

13.Connect the battery positive cable and negative cable to the battery.