Water Passage Installation
|1.||Clean and dry the water passage mating surfaces.|
|2.||Apply liquid gasket, 08C70-K0234M, 08C70- K0334M or 08C70-X0331S, evenly to the cylinder block mating surface of the water passage and to the inner threads of the bolt holes.|
NOTE: Do not install the parts if 5 minutes or more hove elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing old residue.
|3.||Install the water passage (A) with a new O-ring (B).|
|4.||After assembly, wait at least 30 minutes before filling the engine with oil.|