Water Passage Installation

1.Clean and dry the water passage mating surfaces.

2.Apply liquid gasket, 08C70-K0234M, 08C70- K0334M or 08C70-X0331S, evenly to the cylinder block mating surface of the water passage and to the inner threads of the bolt holes.

NOTE: Do not install the parts if 5 minutes or more hove elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing old residue.


3.Install the water passage (A) with a new O-ring (B).


4.After assembly, wait at least 30 minutes before filling the engine with oil.