VTEC Solenoid Valve Removal/Inspection


1.Disconnect the VTEC solenoid valve 2P connector.

2.KG, KS, KE, KR, KU (Hong Kong) models: Disconnect the VTEC oil pressure switch 2P connector.

3.Measure resistance between the VTEC solenoid valve connector terminals No. 1 and No. 2.

Resistance: 14-30 W 

 

4.If the resistance is within specifications, remove the VTEC solenoid valve assembly (A) from the cylinder head, and check the VTEC solenoid valve filter (B) for clogging. If it is clogged, replace the solenoid valve filter, the engine oil filter, and the engine oil.