Low Fuel Indicator Test

1.Do the fuel gauge sending unit test.

  • If the system is OK, go to 2.
  • If the system has any malfunction, repair it.

2.Turn the ignition switch OFF. Remove the No. 9 BACK UP (10A) fuse from the under-hood fuse/relay box for at least 30 seconds, then reinstall it.

3.Turn the ignition switch ON (II) with the float at the E (EMPTY) position.


4.Turn the ignition switch OFF. Remove the No. 9 BACK UP (10A) fuse from the under-hood fuse/relay box for at least 30 seconds, then reinstall it.

5.Lift the float above the 1/2 position.