Door Moldings Replacement

NOTE:
  • Wrap the blade of your putty knife or flat-tip screwdriver with protective tape to prevent damage to the door.
  • Be careful not to pry too far or you may bend the molding.
  • Put on gloves to protect your hands.

1.Prepare to release the molding clips from inside the vehicle:


2.Release the clips and gently pry the front door molding (A) or rear door molding (B) away from the door while removing the adhesive tape (C, D).

Adhesive tape C: 3M5311 or equivalent 
Thickness 1.2 mm (0.047 in.), Width 5 mm (0.2 in.) 
Adhesive tape D: 3M5311 or equivalent 
Thickness 1.2 mm (0.047 in.), Width 8 mm (0.3 in.) 

 

3.Install the moldings in the reverse order of removal, and replace any damaged clips and adhesive tape.