DTC Troubleshooting: 52

DTC 52:  Motor Stuck OFF

1.Check the No. 10 (30A) fuse in the under-hood fuse/relay box.

Is the fuse OK?


YES - Reinstall the fuse, and go to 2.


NO - Replace the fuse, and recheck.n


2.Disconnect the negative cable from the battery.

3.Disconnect the ABS control unit 47P connector.

4.Reconnect the battery cable.

5.Measure the voltage between the ABS control unit 47P connector terminal No. 1 and body ground.

 

Is there battery voltage?


YES - Go to 6.


NO - Repair open in the wire between the No. 10 (30A) fuse and the ABS control unit.n

6.Check for continuity between the ABS control unit 47P connector terminal No. 47 and body ground.

 

Is there continuity?


YES - Check for loose terminals in the ABS control unit 47P connector. If necessary, substitute a known-good  ABS modulator-control unit, and recheck.n


NO - Repair open in the wire between the ABS control unit and body ground ( G202).n