Maintenance Schedule for Normal Conditions (KQ)


Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply. 

Service at the indicated distance or time whichever comes first. km x 1,000 20 40 60 80 100 120 140 160 180 200 
miles x 1,000 12 24 36 48 60 72 84 96 108 120 
months 12 24 36 48 60 72 84 96 108 120 
Replace engine oil
 
Every 10,000 km (6,000 miles) or 1 year 
Replace engine oil filter
 
l l l l l l l l l l 
Replace air cleaner element  l  l  l  l  l 
Inspect valve clearance  l  l  l  l  l 
Replace fuel filter  l  l  l  l  l 
Replace spark plugs  l  l  l  l  l 
Inspect and adjust drive belts  l  l  l  l  l 
Inspect idle speed     l      
Replace engine coolant At 200,000 km (120,000 miles) or 10 years, then replace every 100,000 km (60,000 miles) or 5 years 
Replace manual transmission fluid      l     
Replace automatic transmission fluid At 120,000 km (72,000 miles) or 6 years, then replace every 80,000 km (48,000 miles) or 4 years 
Replace rear differential fluid (4WD model)      l   l  
Inspect front and rear brakes l l l l l l l l l l 
Replace brake fluid Every 3 years 
Check parking brake adjustment l l  l  l  l  l 
Check light alignment l l l l l l l l l l 
Test drive
  • Check for road stability, noise, vibrations and dashboard operation.
 
l l l l l l l l l l 

Service at the indicated distance or time whichever comes first. km x 1,000 20 40 60 80 100 120 140 160 180 200 
miles x 1,000 12 24 36 48 60 72 84 96 108 120 
months 12 24 36 48 60 72 84 96 108 120 
Visually inspect the following items:
  • Check for correct installation and position, check for cracks, deterioration, rust, and leaks.
  • Check tightness of screws, nuts, and joints. If necessary, retighten.
 
Tie rod ends, steering gearbox, and boots l l l l l l l l l l 
Suspension components 
Driveshaft boots 
Brake hoses and lines (including ABS) 
All fluid levels and condition of fluids 
Exhaust system 
Fuel lines and connections 
Tyre connection
  • Check for pressure, puncture, cuts, and irregular thread wear.