Front Passenger's Airbag Replacement (KX/KD)

Removal - KX and KD Models

1.Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.

2.Remove the access panel (A) from above the glove box.

3.Disconnect the front passenger's airbag 4P connector (B) from dashboard wire harness.


4.Remove the three mounting nuts (A) from the bracket. Cover the lid and dashboard with a cloth, and pry carefully with a screwdriver to lift the front passenger's airbag (B) out of the dashboard.

NOTE: The airbag lid has pawls on its side which attach it to the dashboard.


Installation - KX and KD Models

1.Place the new front passenger's airbag (A) into the dashboard. Tighten the front passenger's airbag mounting nuts (B).


2.Connect the front passenger's airbag 4P connector (A) to the dashboard wire harness, then reinstall the access panel (B) and the glove box.


3.Reconnect the battery negative cable.

4.After installing the airbag, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.