Radio Remote Switch Test/Replacement

1.Remove the two screws from the radio remote switch (A).

 

2.Disconnect the 2P connector from the radio remote switch.

3.Measure resistance between the No. 1 and No. 2 terminals in each switch position according to the table.

Position Resistance 
OFF about 10 kW 
AM/FM about 3.2 kW 
CH about 1 kW 
5
(VOL. UP) 
about 320 W 
6
(VOL. DOWN) 
about 50 W 

4.If the resistance is not as specified, replace the remote switch.