Front Inner Fender Replacement

NOTE: Take care not to scratch the body.

1.Remove the front inner fender (A).

-1 On the back of the wheel arch, remove the screws (B), then remove the front splash guard (C).
-2 With a Torx T30 bit, remove the bolt (D) securing the front wheel arch protector.
-3 From under the front bumper (E), remove the clips (F) securing the front bumper, splash shield (G), and front inner fender.
-4 From the wheel arch, remove the screw (H), and remove the clips (I) securing the front inner fender (and splash shield) on the body.
-5 Release the hook (J) of the splash shield, then remove the front inner fender.

 

2.Install the inner fender in the reverse order of removal, and note these items:

  • Replace any damaged clips.
  • Push the clips into place securely.