Interior Trim Removal/Installation - Door Area

Front Door Sill Area


NOTE:

1.Remove the left kick panel (A) or the right kick panel (B).

-1 Left side: Pull the hood release handle (C) and fuel fill door opener (D), and hold it.
-2 Pull the kick panel back by hand to detach the clips (E, F) and hooks (G).

 

2.Detach the hooks (A) and tab (B) from the center pillar lower trim (C), and pull the front door sill trim (D) out by hand to detach the clips, then remove it.

 

3.Pull out the front door opening trim (A) from the center pillar lower trim (B) and around the front door opening flange, then remove the trim.

 

4.Install the trim in the reverse order of removal, and note these items:

  • Replace any damage clips.
  • Push the clips, hooks, and tab into plase securely.

Rear Door Sill Area


NOTE:

1.Tip up the rear seat.

2.Detach the hooks (A) and tabs (B) from the center pillar trim (C) and rear side trim panel (D), and pull the rear door sill trim (E) up by hand to detach the clips, then remove it.

 

3.Pull out the rear door opening trim (A) from the center pillar trim (B) and rear side trim panel (C) and around the door opening flange, then remove the trim.

 

4.Install the trim in the reverse order of removal, and note these items:

  • Replace any damaged clips.
  • Push the clips, hooks, and tabs into plase securely.